WILO
WILO DRAIN TM/TMW submersible drainage pump
![](/-/media/Images/commerce/MAS00/08/48/HO_20171129134153-drain_tm_tmw_big.png?mh=233&mw=233&hash=C4CFBA8A7218E5FD9F9DD170808CF5B0)
Skip to content | Go to the main menu | Go to search
Don't have an account? Registration
WILO
Variant Product No.
Availability
Price (VAT incl.)
Product No.: ZB00017431 Sale group: CEW07 EAN: 4016322477402 Manuf. No.: 4048411
266.19 €
Product No.: ZB00004112 Sale group: CEW07 EAN: 4016322536468 Manuf. No.: 4058059
290.39 €
Product No.: ZB00004110 Sale group: CEW07 EAN: 4016322477419 Manuf. No.: 4048412
245.62 €
Product No.: ZB00004115 Sale group: CEW07 EAN: 4016322536475 Manuf. No.: 4058060
308.54 €
User-friendly – ergonomic handle, low weight, ready-to-plug version (Plug&Pump)
Operationally reliable – stainless steel-encapsulated motor with sheath flow cooling, mechanical seal and sealing chamber
Drain TMR with flat suction – minimal residual water level of 2 mm
Submersible drainage pump
Pumping of
Sewage without faeces or long-fibre constituents
Wastewater
Connection cable with plug
Float switch
Self-switching thermal motor monitoring
Sheath current cooling
Pump with connection cable and plug
Fitted float switch (apart from TM 32/8-10)
Threaded connection with non-return valve (Drain TMW/TMR)
Hose connection, supplied (Drain TM)
Installation and operating instructions
Example: |
Wilo-Drain TMW 32/11 HD-10M |
TM |
Series |
W |
Version:
|
32 |
Nominal diameter of pressure connection |
11 |
Max. delivery head in m |
HD |
Version for aggressive fluids (AISI 316L) |
10M |
Varying cable lengths:
|
Mains connection 1~ 230 V, 50 Hz
Protection class: IP68
Max. immersion depth:
4 m cable length: 1 m
10 m cable length: 4 m
Fluid temperature: 3 ... 35 °C, briefly up to 3 min.: max. 90 °C
Pressure port:
Drain TM: G 1¼male
Drain TMW/TMR: G 1¼female
TM/TMW/TMR:
Motor housing 1.4301(AISI 304)
Pump housing: PP-GF30
Impeller: PPE/PS-GF20
Shaft: 1.4104 (AISI 430F)
Seal:
On motor side: NBR
Fluid side: Carbon/ceramic
TMW ... HD:
Motor housing 1.4404 (AISI 316L)
Pump housing: PP-GF30
Impeller: PPE/PS-GF20
Shaft: 1.4404 (AISI 316L)
Seal:
On motor side: NBR
Fluid side: Carbon/ceramic
Submersible pump for stationary and portable wet-well installation in fully automatic mode with attached float switch.
Hydraulics
The pumps are equipped with an open multi-vane impeller and have a free ball passage of 10 mm (TM/TMW) or 2 mm (TMR). The pressure connection is a vertical hose connection (TM) or threaded connection (TMW/TMR).
Motor
Sheath flow-cooled single-phase AC motor with integrated operating capacitor. The motor heat is transferred directly to the fluid via the motor housing.
The motor is equipped with automatic thermal motor monitoring. This means that the motor is switched off if it overheats and will be automatically switched on again once it has cooled down.
Seal
The seal is created on the fluid side by a mechanical seal, and on the motor side by a rotary shaft seal. A sealing chamber with a white-oil filling is located between the gaskets.
Cable
The pump is equipped with a 4 or 10 m long connection cable with a shockproof plug and a fitted float switch (not TM 32/8-10M).
Versions:
Drain TMW with twister function - The twister function guarantees permanent turbulence within the pump's intake area. This prevents settling sediment from sinking and settling. This results in a clean pump sump and reduces the build-up of odours
Drain TMR with flat suction - The special strainer enables the fluid to be pumped out to a remaining level of 2 mm.